This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
v1600g1_gpon_olt_configuration_as_isp [2017/11/10 11:24] admin created |
v1600g1_gpon_olt_configuration_as_isp [2022/10/20 12:55] (current) admin |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | Pass after update: Xpon@Olt9417# | ||
| + | |||
| Here you have step to configure a basic connexion between the OLT and the ONU | Here you have step to configure a basic connexion between the OLT and the ONU | ||
| * Create vlan: VLAN ID: 10 | * Create vlan: VLAN ID: 10 | ||
| + | * OTL Configuration | ||
| + | * Uplink Port | ||
| + | * GE16, PVID: 10 | ||
| + | * VLAN | ||
| + | * VLAN Port | ||
| + | * VLAN ID: 10 | ||
| + | * GE16: Untag | ||
| * In suspend: configure the OLT as DHCP? | * In suspend: configure the OLT as DHCP? | ||
| * Create DBA profiles: | * Create DBA profiles: | ||
| Line 7: | Line 16: | ||
| * Assured(Kbps): 1024 | * Assured(Kbps): 1024 | ||
| * Maximum(Kbps): Your offer | * Maximum(Kbps): Your offer | ||
| + | * Create ONU profile | ||
| + | * Max VEIP: 1 | ||
| + | * Add Service profile | ||
| + | * ONU AutoFind | ||
| + | * Add ONU | ||
| + | * Go to the ONU config | ||
| + | * Add Tcont | ||
| + | * Add Gemport | ||
| + | * Add service | ||
| + | * Vlan Mode: Tag | ||
| + | * Vlan List: 10 | ||
| + | * Add service (ZTE bridge) | ||
| + | * Vlan Mode: Transparent | ||
| + | * Vlan Type: Eth | ||
| + | * Add service Port | ||
| + | * Service Mode: Cvlan | ||
| + | * Service Port: 1 | ||
| + | * Gemport ID: 1 | ||
| + | * BenginVid: 10 | ||
| + | * EndVid: 10 | ||
| + | * Vlan: 10 | ||
| + | * Mode: 1:1 | ||
| + | * Enable: YES | ||
| + | * Rest into: N/A | ||
| + | * PortVlan | ||
| + | * Port Type: Veip | ||
| + | * Mode: Transparent | ||
| + | * Port Id: 1 | ||