User Tools

Site Tools


how_configure_bgp_with_tunnelbroker.net_with_quagga

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
how_configure_bgp_with_tunnelbroker.net_with_quagga [2018/01/19 23:30]
admin
how_configure_bgp_with_tunnelbroker.net_with_quagga [2018/01/23 15:04] (current)
admin
Line 1: Line 1:
 How configure **BGP** with tunnelbroker.net (**Hurricane Electric**, AS 6939) with **Quagga** How configure **BGP** with tunnelbroker.net (**Hurricane Electric**, AS 6939) with **Quagga**
 +
 +**__Require public fixed IPv4__**
  
 == Note == == Note ==
Line 8: Line 10:
   * Firstly we run: Example Configurations -> Linux-net-tools   * Firstly we run: Example Configurations -> Linux-net-tools
   * echo ''​ > /​var/​log/​bgpd.log;​chown quagga.quagga /​var/​log/​bgpd.log   * echo ''​ > /​var/​log/​bgpd.log;​chown quagga.quagga /​var/​log/​bgpd.log
 +  * **Always check your internet MTU support.** Change MTU for limited MTU as GPON
 +    * ifconfig sit0 mtu 1280 up
 +    * ifconfig sit0 mtu 1280 up
 +    * On the avanced option into tunnel broker
  
 == zebra.conf == == zebra.conf ==
Line 28: Line 34:
   router bgp 266671   router bgp 266671
    bgp router-id [190.186.245.10 your public ip]    bgp router-id [190.186.245.10 your public ip]
-   ​neighbor [2001:​470... ​Server IPv6 Address] remote-as 6939+   ​neighbor [IPv6 Tunnel Endpoints, ​Server IPv6 Address] remote-as 6939
   !   !
    ​address-family ipv6    ​address-family ipv6
    ​network 2803:​1920::/​32    ​network 2803:​1920::/​32
-   ​neighbor [2001:​470... ​Server IPv6 Address] activate+   ​neighbor [IPv6 Tunnel Endpoints, ​Server IPv6 Address] activate
    ​exit-address-family    ​exit-address-family
    exit    exit
Line 56: Line 62:
           inet6 fe80::​ac14:​9 ​ prefixlen 64  scopeid 0x20<​link>​           inet6 fe80::​ac14:​9 ​ prefixlen 64  scopeid 0x20<​link>​
           sit  txqueuelen 1000  (IPv6-in-IPv4)           sit  txqueuelen 1000  (IPv6-in-IPv4)
 +
 +== check BGP ==
 +  * vtysh
 +  * show ip bgp summary
 +    * Should show:
 +
 +  BGP router identifier 190.186.203.2,​ local AS number 266671
 +  RIB entries 0, using 0 bytes of memory
 +  Peers 1, using 4944 bytes of memory
 +  Neighbor ​       V         AS MsgRcvd MsgSent ​  ​TblVer ​ InQ OutQ Up/​Down ​ State/​PfxRcd
 +  2001:470:1
 +                  4  6939  219827 ​   2721        0    0    0 1d21h10m ​       0
 +  Total number of neighbors 1
 +  Total num. Established sessions 1
 +  Total num. of routes received ​    0
 +  ​
  
how_configure_bgp_with_tunnelbroker.net_with_quagga.1516404631.txt.gz ยท Last modified: 2018/01/19 23:30 by admin