Wiki de Confiared

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
How configure **BGP** with tunnelbroker.net (**Hurricane Electric**, AS 6939) with **Quagga**

**__Require public fixed IPv4__**

== Note ==
  * Why Quagga? You don't be linked with specific hardware, any x86, ARM, ... with EEE for PTP linux support and your preferred Linux is working
  * Why tunnelbroker.net (Hurricane Electric)? Allow free tunnel to do a basic setup.
  * Our ASN: 266671
  * We are using: net-misc/quagga-1.2.1::gentoo USE="bgpclassless ipv6 readline"
  * Firstly we run: Example Configurations -> Linux-net-tools
  * echo '' > /var/log/bgpd.log;chown quagga.quagga /var/log/bgpd.log
  * **Always check your internet MTU support.** Change MTU for limited MTU as GPON
    * ifconfig sit0 mtu 1280 up
    * ifconfig sit0 mtu 1280 up
    * On the avanced option into tunnel broker

== zebra.conf ==
  !
  hostname ourrouterbgpname
  password XXXXXXXXXXXXXXXXXXXXX
  log file /var/log/bgpd.log
  log stdout
  !
  line vty
  !

== bgpd.conf ==
  !
  hostname ourrouterbgpname
  password XXXXXXXXXXXXXXXXX
  log file /var/log/bgpd.log
  log stdout
  !
  router bgp 266671
   bgp router-id [190.186.245.10 your public ip]
   neighbor [IPv6 Tunnel Endpoints, Server IPv6 Address] remote-as 6939
  !
   address-family ipv6
   network 2803:1920::/32
   neighbor [IPv6 Tunnel Endpoints, Server IPv6 Address] activate
   exit-address-family
   exit
  !
  line vty
  !

== ifconfig ==
  eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
          inet 190.186.245.10  netmask 255.255.255.0  broadcast 190.186.203.255
  
  sit0: flags=193<UP,RUNNING,NOARP>  mtu 1480
          inet6 ::192.168.0.9  prefixlen 96  scopeid 0x80<compat,global>
          inet6 ::127.0.0.1  prefixlen 96  scopeid 0x90<compat,host>
          inet6 ::172.20.0.9  prefixlen 96  scopeid 0x80<compat,global>
          inet6 ::190.186.203.22  prefixlen 96  scopeid 0x80<compat,global>
          sit  txqueuelen 1000  (IPv6-in-IPv4)
  
  sit1: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1480
          inet6 2001:470:10:31::2  prefixlen 64  scopeid 0x0<global>
          inet6 fe80::beba:cb16  prefixlen 64  scopeid 0x20<link>
          inet6 fe80::c0a8:9  prefixlen 64  scopeid 0x20<link>
          inet6 fe80::ac14:9  prefixlen 64  scopeid 0x20<link>
          sit  txqueuelen 1000  (IPv6-in-IPv4)

== check BGP ==
  * vtysh
  * show ip bgp summary
    * Should show:

  BGP router identifier 190.186.203.2, local AS number 266671
  RIB entries 0, using 0 bytes of memory
  Peers 1, using 4944 bytes of memory
  Neighbor        V         AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
  2001:470:1
                  4  6939  219827    2721        0    0    0 1d21h10m        0
  Total number of neighbors 1
  Total num. Established sessions 1
  Total num. of routes received     0
Wiki de Confiared

User Tools

Site Tools

Page Tools
