Pass after update: Xpon@Olt9417#

Here you have step to configure a basic connexion between the OLT and the ONU

  * Create vlan: VLAN ID: 10
  * OTL Configuration
    * Uplink Port
      * GE16, PVID: 10
    * VLAN
      * VLAN Port
        * VLAN ID: 10
          * GE16: Untag
  * In suspend: configure the OLT as DHCP?
  * Create DBA profiles:
    * Profile Type: 3
    * Assured(Kbps): 1024
    * Maximum(Kbps): Your offer
  * Create ONU profile
    * Max VEIP: 1
  * Add Service profile
  * ONU AutoFind
    * Add ONU
  * Go to the ONU config
    * Add Tcont
    * Add Gemport
    * Add service
      * Vlan Mode: Tag
      * Vlan List: 10
    * Add service (ZTE bridge)
      * Vlan Mode: Transparent
      * Vlan Type: Eth
    * Add service Port
      * Service Mode: Cvlan
      * Service Port: 1
      * Gemport ID: 1
      * BenginVid: 10
      * EndVid: 10
      * Vlan: 10
      * Mode: 1:1
      * Enable: YES
      * Rest into: N/A
    * PortVlan
      * Port Type: Veip
      * Mode: Transparent
      * Port Id: 1